How to make straps using the Adamventure loop turner
Cut a length of fabric twice the finished width of the strap plus at least 2cm for the seam allowance.
n.b. A bias strip will give you more flexibility than one cut on the straight grain of the fabric.
Fold the strip right sides together, and stitch 1cm from the raw edges (or half the total seam allowance if yours was more than 2cm)
Press the seam allowance open and trim close to the stitching line.
Insert the loop turner into the tube with the latch open, and push through until the latch comes out of the other
end. Hook the loop turner onto the fabric and close the latch.
Pull the loop turner back through the tube to turn the tube right side out.
Press, and use as required